Polar RC3 GPS without Heart Rate Sensor (90044686)

In the Box

Polar RC3 GPS with heart rate

• Polar RC3 GPS training computer
  
  
• Polar H3 heart rate sensor
  
  
• USB cable
  
  
• RC3 GPS Getting Started Guide
  
  

Polar RC3 GPS without heart rate (This Product)

• Polar RC3 GPS training computer
  
  
• USB cable
  
  
• RC3 GPS Getting Started Guide
  
  

For recreational runners and cyclists who want integrated GPS with smart guidance.

• Training Benefit gives you instant feedback after your session
  
  
• Tracks your route, speed and distance using built-in GPS
  
  
• Running Index scores your performance
  
  
• Slim and lightweight design, only 58 grams
  
  
• Rechargeable battery, 12 hours in continuous use with GPS on
  
  
• Allows you to share your training with your friends
  
  

• Average and maximum heart rate of each lap
  
  
• Average, minimum and maximum heart rate of training
  
  
• Heart rate – bpm / %

  Heart rate is the measurement of the work your heart does. Heart rate can be expressed as the number of beats per minute (bpm) or as a percentage (%) of your maximum heart rate.

  
  
• HRmax (age-based)

  The highest number of heart beats per minute (bpm) during maximum physical exertion. For a rough estimate of your maximum heart rate, subtract your age from 220. HRmax is a useful tool for determining the intensity of training as intensity zones can be defined using HRmax. Some Polar products define maximum heart rate during the Polar Fitness Test, see also HRmax (Polar Fitness Test -based).

  
  
• HRmax (user set)
  
  
• Polar Fitness Test

  Polar Fitness Test measures your aerobic fitness at rest in just five minutes. The result, Polar OwnIndex, evaluates your maximal oxygen uptake (VO2max). With the Polar Fitness Test you can measure your aerobic fitness by yourself, automatically and without any exertion. All you need is your training computer. The Polar Fitness Test is as accurate in predicting the VO2max as any sub maximal fitness test. The test is based on heart rate and heart rate variability at rest and personal information.

  
  
• Polar OwnCal® – calorie expenditure with fat percentage

  Polar OwnCal calculates the number of kilocalories expended during training. This feature allows you to follow the kilocalories expended during one training session and cumulative kilocalories expended during several training sessions. Some Polar products also estimate the fat-burning percentage (fat% on display), that is, kilocalories expended from fat during a workout which is expressed as a percentage of the total kilocalories burned.

  
  
• Polar OwnCode® (2.4 GHz W.I.N.D.) – coded transmission

  Coded heart rate transmission automatically locks in a code to transmit your heart rate to the training computer. The training computer picks up your heart rate from your transmitter only. Coding significantly reduces interference from other training computers. The 2.4 GHz W.I.N.D transmission is disturbance-free from other electronic devices.

  
  
• Polar sport zones

  Polar sport zones provide an easy way to select and monitor the intensity of your training and to follow sport zones based training programs. Training is divided into five zones based on percentages of your maximum heart rate: very light (50-60%HRmax), light (60-70%HRmax), moderate (70-80%HRmax), hard (80-90%HRmax) and maximum (90-100%HRmax).

  
  
• Polar ZoneOptimizer - personalized sport zones

  ZoneOptimizer adjusts personal sport zones for every training session based on your current physiological condition. This feature gives you the right heart rate zones depending on your physiological state at that exact moment, making sure that the you are always training at the right intensity.

  
  
• Polar Training Benefit
  The Training Benefit feature displays instant feedback on your training computer right after you finish your training session. The training computer will first display a short Training Benefit summary. In the training result file the longer Training Benefit is displayed. When you transfer your training result to polarpersonaltrainer.com, there is a more physiologically oriented Benefit explanation in your Diary. Training Benefit interprets the numeric data that your training computer records during your training session and explains what kind of effects the training session had on your body and fitness. The Training Benefit feature is available in select training computers.
  
  
  

• Bike settings – for two bicycles

  You can define settings up to two to three bikes in your training computer. When you start training, you can select the bike with the correct settings for that particular training session.

  
  
• Cadence – current, average and maximum

  Your cycling cadence stands for your pedaling rate in revolutions per minute (rpm). Cadence is the central factor in improving cycling performance. A higher cadence reduces the force needed for each pedal stroke, and thus improves overall performance. Running cadence measures how many times your either right or left foot hits the ground in one minute. Running cadence is measured as steps per minute. With this feature you can sharpen your cadence and make your ground contact time shorter. This will help you to find a balance between leg power and leg speed.

  
  

• Autostart/stop

  By activating Autostart/autostop feature, the cycling computer starts and stops training recording automatically when you start or stop pedaling.

  
  
• Bike settings – for two bicycles

  You can define settings up to two to three bikes in your training computer. When you start training, you can select the bike with the correct settings for that particular training session.

  
  
• Distance – training, lap, and total

  Distance (km, mi) can be set and measured in several ways. Training distance tells you the distance traveled during a training session. Trip distance tells you the distance from the latest trip reset. Lap distance tells you the distance of one lap. Total distance is the distance accumulated since the last reset. Odometer tells you the cumulative distance which you cannot reset.

  
  
• Speed – current, average and maximum
  
  

• Compatible with Mac (Intel-based) via USB cable
  
  
• Compatible with PC via USB cable
  
  
• Compatible with polarpersonaltrainer.com via USB cable
  
  

• Back to start
  
  
• Distance – training, lap, and total
  
  
• Route mapping – opt. with polarpersonaltrainer.com web service
  
  
• Running Index

  Running Index is based on heart rate and speed data measured during the run. It gives daily information about your performance level, both aerobic fitness and running economy. Improvement in running efficiency indicates improved economy of running performance.

  
  
• Speed/Pace – current, average and maximum
  
  

• Advanced training analyzing

  You can easily analyze each of your training sessions in the training result view. In addition to many useful details about your training, the Curve illustrates graphically the data from the sensors that you used while training. Place your mouse cursor on the curve to see more details.

  
  
• Map view
  
  

• Totals

  Totals includes your training data starting from the last reset enabling you to follow your long-term training.

  
  
• Training files (with summaries) – 99
  
  
• Weekly history

  Weekly history gathers your weekly training data. By selecting a week, you can review your training data for the week.

  
  

• Number of laps – 99
  
  
• Sport Profiles (5 fixed sport profiles)
  
  
• Graphical target zone indicator

  This feature points out graphically on the display the zone you are in during a training session helping you to stay on the desired intensity zone.

  
  
• Automatic lap recording

  With this feature you can set your training computer to take laps based on preset distance, for example, every 1 km/mi.

  
  
• ZonePointer

  ZonePointer is a visible and moving symbol on the training computer display indicating whether you are inside the pre-set target zone. This feature helps you to reach the desired intensity/pace/speed/cadence targets.

  
  
• ZoneLock

  ZoneLock feature helps you to accumulate certain intensity. You can either lock a zone before a training session or during it by pressing a button when you are on the desired zone.

  
  

• Backlight
  
  
• Date and weekday indicator
  
  
• Display text in English, German, French, Spanish, Portuguese, Italian, Dutch, Danish, Finnish, Norwegian and Swedish
  
  
• Dual time zone
  
  
• KeyLock

  By activating KeyLock, training computer buttons are locked, and accidental presses do not cause problems, for instance, during training.

  
  
• Low battery indicator
  
  
• Rechargeable battery
  
  
• Battery life: 12h in continuous use with GPS on, 11 days when training 1h/day with GPS on
  
  
• Time of day (12/24h) with alarm and snooze
  
  
• Water resistant – IPX7

  Not suitable for bathing or swimming. Protected against wash splashes and raindrops.

  
  

• Speed/Pace – current, average and maximum

  Speed (km/h or mi/h) is measured with GPS, footpod, stride sensor or cycling speed sensor. Pace (expressed as min/km or min/mile) stands for the rate of speed. Pace is usually used in running. By setting a target pace, you can follow how fast you need to run in order to reach a certain distance in a predefined time.

  
  
• Running Index

  Running Index is based on heart rate and speed data measured during the run. It gives daily information about your performance level, both aerobic fitness and running economy. Improvement in running efficiency indicates improved economy of running performance.

  
  
• Cadence – average and maximum
  
  
• Average stride length

  Stride length is the average length of one step, that is, the distance between your right and left foot contacting the ground. Runners adjust stride length to gather speed: stride length increases as speed increases. Yet one of the most common mistakes novice runners make is over-striding. The most efficient stride length is the natural one – the one that feels most comfortable.

  
  
• Distance – training, lap, and total